This is a view of the drivers side front suspension. The 11.75 inch rotors and aluminum rotor hat are from Wilwood. The spindle is a 76 Monza which used mush smaller ball joints there fore its lighter, Plus I machined a little over three pounds off the spindle. The hub is a 1969 Nova with special selves I machined to accept Vega Bearings. The Ball joints are for a Vega so they are very light. I built the upper and lower control arms from chrome moly and I used Aluminum Heim joints. The upper A-Arm weights only 2.9 pounds complete with ball joint, Hemi joints with mounting bolts all the bolts in the front suspension are titanium. The coil over shocks are Carrera, but I am going to use a shorter spring (less Weight).